JET 321376 Manuel d'utilisation et d'entretien télécharger pdf (Page 21)

Lubrication Schedule

(Figures 40 and 41)

Figure 40



Note: Lubricate all locations daily.

Grease refers to #2 tube grease.

Oil refers to 20W machine oil.

1 – 1 to 2 squirts of oil into oil ball on gear hub.

2 – Grease teeth of feed and change gears.

1 to 2 squirts of oil into oil ball on gear hub.

3 – Lightly Coat gear teeth with oil.

1 to 2 squirts of oil into oil ball on gear hub.

4 – Wipe bedways clean and coat lightly with oil.

5 – Grease rack over complete length.

6 – Clean and oil leadscrew over complete length.

7 – 1 to 2 squirts of oil into oil ball on leadscrew

bracket.

8 – Lightly coat screw and guides of top slide with

oil.

9 – 1 to 2 squirts of oil into oil ball on top of tailstock

body.

10 – 1 to 2 squirts of oil into oil ball on top of

carriage.

11 – 1 to 2 squirts of oil into hub for feed lever.

12 – 1 to 2 squirts of oil into two oil balls on apron

front.

Figure 41

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Pas de commentaire

JET 321376 Manuel d'utilisation et d'entretien Page 21